Bogen MVP810BG Manual de usuario descargar pdf (Pagina 3)

• Expandable from 3 to 12 zones (in 3 zone

increments using ZX3 modules; one ZX3

module included)

• One-way paging only

• Interfaces to Loop Start, Ground Start,

Analog Station, and Page Ports (with or

without contact closure activation)

• Simple 2-switch interface setup

• 2 Background music (BGM) inputs with

level controls

• BGM sources assignable per zone

• Level control for each zone output

• Zone active indicators

• C-form contact per zone

• 150 Speaker T/R drive capacity per zone

• 24V DC, 1A power supply

• Programmable AUX Relay

• Page level limiter with active indicator

• Adjustable automatic level control

• Override input (loop start or page port)

• Code calling capability

• 2 Tone trigger inputs for tone burst,

chime, double chime, and slow whoop

tone selections

• Contact and 90V Night Ring inputs

• Pre-announce tone

• Confirmation tone

• Separate night ring and tone volume controls

• 24 User-assignable zone groups

• Separate override, all-call, tone trigger,

night ring, and code call zone groups

• Auto select paging zone group

• 2-, 3-, 4-, or 5-digit dialing plans

•

Microcontroller operated, DTMF programmable

• Night ring tone or chime selection

• Setup test tone

• Pluggable terminal strip connectors

• Programming through override jack

• Programmable timeout for station mode

• Programmable trunk port timeout

• Responds to CPC disconnect signal

• Includes wall or rack brackets

• FCC Part 68 Registered

• Listed to UL Standard 60950

for US and Canada

Accessories

Override Zone Group

The override input on the UTI312 has

the highest priority of all the inputs

but does not have to provide an All-

Call function. Since the override has a

zone group associated with it, the

installer can determine which zones

receive pages during an override.

For example, assume that in a 12-zone

system 11 zones are used to provide

audio to different parts of a building, but

one zone is not used for audio purposes.

The contact closure for this zone is used

to control a door latch. When this zone

is active, the latch is open. If the override

was predefined to activate all zones,

then the door latch would open during

override operation which may not be

desirable. By programming the override

zone group with all zones except the one

connected to the door latch, an override

can be made and the door will remain

locked.

Two Background Music Inputs

In a system with multiple zones, it is not

uncommon to find applications that

have different background music (BGM)

requirements in different zones. To

provide flexibility in these situations, the

UTI312 has 2 BGM inputs. Each zone,

through jumper assignments on the ZX3

module, can select one or the other BGM

source, or none at all.

Auto Select Paging

When using the auto select paging fea-

ture, there is no need to dial a zone or

zone group. Whenever the paging input

becomes active, the auto select paging

zone group, with user-assigned zones,

will determine what zones are active.

This may seem to be an unusual function

for a multi-zone paging application.

However, often the need for zoning is

determined not by voice paging needs,

but by the need to play tones in differ-

ent zones.

In these instances, a shift change tone

may need to be produced in the factory

areas but not in the office areas. So a

tone trigger zone group will be set up to

channel the tone just into the factory. In

this case, voice paging is done like an

All-Call, but the tones are zoned.

ZX3

3-Zone Plug-In

Expansion Module

(one included

with UTI312)

Bogen’s UTI312 is a multi-zone paging controller with universal telephone interface.

It is expandable from 3 to 12 zones in 3-zone increments using ZX3 expansion modules.

Each zone has its own buffered paging output (150 speaker drive capacity) with volume con-

trol, a C-form relay contact and “zone active” indicator. Each module includes a pluggable

24V DC power distribution terminal strip and pluggable terminal strips for each zone for

easy wiring. A built-in 24V DC, 1A power supply is provided for powering amplified speakers.

The UTI312’s universal telephone interface is identical to the UTI1 (page 31). Two back-

ground music (BGM) inputs, with volume controls, provide each zone with a choice of BGM

sources or no BGM. Two tone triggers are available as well as a 90V night ringer input.

Separate volume controls for the night ring and tone triggers, along with an adjustable

page level limiter, make it easy to set appropriate levels.

Powerful software features provide the UTI312 enormous flexibility for demanding appli-

cations. 2-, 3-, 4-, or 5-digit dialing plans allow the UTI312 to fit into any dialing structure.

Twenty-four zone groups, zone groups for each tone input and night ring as well as a zone

group for the override input, provide plenty of installer flexibility. A programmable AUX

relay contact, in addition to the zone relay contact, provides flexibility for controlling external

equipment based on the UTI312’s activity.

Product Features:

Power

Dimensions

Product

Requirements Weight

120V AC,

16-3/8" W x 3-1/2" H x 4-7/8" D

8 lb.

0.75A

(without mounting flanges)

19" W (with mounting flanges)

www.bogen.com

PAGING CONTROL

MULTI-ZONE TELEPHONE INTERFACE

Multi-Zone Universal Telephone

Interface

UTI312

UTI312 shown with

3 optional ZX3 Modules

1 2 3 4 5 6 7

Comentarios a estos manuales

Sin comentarios

Bogen MVP810BG Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Bogen MVP810BG